完成M300 Obd协议开发、通用下行应答解析，终端登录下行应答解析，心跳页面、设置页面、版本页面，登录页面的开发

config/m300Tools/m300Tools.conf

+[socket]
+host = 10.100.12.32
+port = 9009
+

lib/protocol/m300/GPS_protocol_m300.py

@@ -7,12 +7,13 @@ from lib.protocol.m300.M300Base import M300Base
 '''
 
 class GPS_protocol_m300(M300Base):
-    def __init__(self,waterCode = "0003",DEV_ID = "M121501010001",dateInfo="2020-03-27 14:34:22",latitude=40.22077,longitude=116.23128 \
+    def __init__(self,waterCode = 3,DEV_ID = "M121501010001",encryptionType=0,dateInfo="2020-03-27 14:34:22",latitude=40.22077,longitude=116.23128 \
                  ,positionStar=2,speed=66.0,direction=55.3,altitude=11.0,ACCStatus=0,valtage=36.0,OBDSpeed=66.4,valid=129 \
                  ,tripMark=0):
         super().__init__()                            # 不执行该方法，无法使用父类里面定义的属性
         self.waterCode = waterCode                    #消息流水号
         self.DEV_ID = DEV_ID                          #设备Id
+        self.encryptionType = encryptionType          # 消息属性里面的是否加密字段
 
         self.dateInfo = dateInfo                      #日期
         self.latitude = latitude                      #维度
@@ -35,11 +36,11 @@ class GPS_protocol_m300(M300Base):
     def generateMsg(self):
         msg = self.IDENTIFY
         FUNID = "0020"                                                   #功能id
-        waterCode = self.waterCode                            #消息流水号
+        waterCode = self.int2hexStringByBytes(self.waterCode,2)          #消息流水号
         DEV_ID = self.devid2hexString(self.DEV_ID)                       #设备id
         msgBody = self.getMsgBody()  # 消息体
         msgLen = int(len(msgBody) / 2)
-        property = self.getMsgProperty(msgBodyLen=msgLen,encryptionType=0)
+        property = self.getMsgProperty(msgBodyLen=msgLen,encryptionType=self.encryptionType)
         checkCode = self.getCheckCode(FUNID + waterCode + DEV_ID + property + msgBody)
         msg = msg + FUNID + waterCode + DEV_ID + property + msgBody + checkCode + self.IDENTIFY
         return msg

lib/protocol/m300/Heartbeat_protocol_300.py

@@ -7,10 +7,11 @@ from lib.protocol.m300.M300Base import M300Base
 '''
 
 class Heartbeat_protocol_300(M300Base):
-    def __init__(self,waterCode = "0003",DEV_ID = "M121501010001"):
+    def __init__(self,waterCode = 3,DEV_ID = "M121501010001",encryptionType=0):
         super().__init__()                            # 不执行该方法，无法使用父类里面定义的属性
         self.waterCode = waterCode                    #消息流水号
         self.DEV_ID = DEV_ID                          #设备Id
+        self.encryptionType = encryptionType          #消息属性里面的是否加密字段
 
     #################################################
     # 生成消息
@@ -18,11 +19,11 @@ class Heartbeat_protocol_300(M300Base):
     def generateMsg(self):
         msg = self.IDENTIFY
         FUNID = "0004"                                                   #功能id
-        waterCode = self.waterCode                            #消息流水号
+        waterCode = self.int2hexStringByBytes(self.waterCode,2)          #消息流水号
         DEV_ID = self.devid2hexString(self.DEV_ID)                       #设备id
         msgBody = self.getMsgBody()  # 消息体
         msgLen = int(len(msgBody) / 2)
-        property = self.getMsgProperty(msgBodyLen=msgLen,encryptionType=0)
+        property = self.getMsgProperty(msgBodyLen=msgLen,encryptionType=self.encryptionType)
         checkCode = self.getCheckCode(FUNID + waterCode + DEV_ID + property + msgBody)
         msg = msg + FUNID + waterCode + DEV_ID + property + msgBody + checkCode + self.IDENTIFY
         return msg

lib/protocol/m300/Login_protocol_m300.py

@@ -5,10 +5,11 @@ from lib.protocol.m300.M300Base import M300Base
 '''
 
 class Login_protocol_m300(M300Base):
-    def __init__(self,waterCode = "0003",DEV_ID = "M121501010001"):
+    def __init__(self,waterCode = 3,DEV_ID = "M121501010001",encryptionType=0):
         super().__init__()                            # 不执行该方法，无法使用父类里面定义的属性
         self.waterCode = waterCode                    #消息流水号
         self.DEV_ID = DEV_ID                          #设备Id
+        self.encryptionType = encryptionType          #消息属性里面的是否加密字段
 
     #################################################
     # 生成消息
@@ -16,11 +17,11 @@ class Login_protocol_m300(M300Base):
     def generateMsg(self):
         msg = self.IDENTIFY
         FUNID = "00FF"                                                  #功能id
-        waterCode = self.waterCode                            #消息流水号
+        waterCode = self.int2hexStringByBytes(self.waterCode,2)         #消息流水号
         DEV_ID = self.devid2hexString(self.DEV_ID)                      #设备id
         msgBody = self.getMsgBody()  # 消息体
         msgLen = int(len(msgBody) / 2)
-        property = self.getMsgProperty(msgBodyLen=msgLen,encryptionType=0)
+        property = self.getMsgProperty(msgBodyLen=msgLen,encryptionType=self.encryptionType)
         checkCode = self.getCheckCode(FUNID + waterCode + DEV_ID + property + msgBody)
         msg = msg + FUNID + waterCode + DEV_ID + property + msgBody + checkCode + self.IDENTIFY
         return msg

lib/protocol/m300/OBDCAN_protocol_m300.py

@@ -7,9 +7,9 @@ from lib.protocol.m300.M300Base import M300Base
 '''
 
 class OBDCAN_protocol_m300(M300Base):
-    def __init__(self,waterCode = "0003",DEV_ID = "M121501010001",timeInfo="2020-03-30 17:00:59",prototolType="11",statusMask="01010101010101010101" \
+    def __init__(self,waterCode = 3,DEV_ID = "M121501010001",encryptionType=0,timeInfo="2020-03-30 17:00:59",prototolType="11",statusMask="01010101010101010101" \
                  ,safeStatus=0,doorStatus=0,lockStatus=0,windowStatus=0,lightStatus=0,swichStatusA=0,swichStatusB=0,dataBit=0 \
-                 ,dataFlowMask="fffffffd",votage=360,totalMilleageType="02",totalMilleage=3000,totalOil=300,troubleLightStatus=0 \
+                 ,dataFlowMask="fffffffd",votage=360,totalMilleageType=2,totalMilleage=3000,totalOil=300,troubleLightStatus=0 \
                  ,troubleCodeNum=2,engineSpeed=3000,speed=60,airInletTemperature=88,coolingLiquidTemperature=76,envTemperature=65 \
                  ,intakeManifoldPressure=20,oilPressure=276,atmosphericPressure=28,airFlow=550,valveLocation=51,acceleratorLocation=32 \
                  ,engineRunTime=370,troubleMileage=4508,surplusOil=801,engineLoad=52,fuelTrim=89,fireAngle=154,dashboardTotailMilleage=3000 \
@@ -17,6 +17,7 @@ class OBDCAN_protocol_m300(M300Base):
         super().__init__()                            # 不执行该方法，无法使用父类里面定义的属性
         self.waterCode = waterCode                    #消息流水号
         self.DEV_ID = DEV_ID                          #设备Id
+        self.encryptionType = encryptionType          #消息属性里面的是否加密字段
 
         self.timeInfo = timeInfo                      #时间信息
         self.prototolType = prototolType              #协议类别
@@ -68,11 +69,11 @@ class OBDCAN_protocol_m300(M300Base):
     def generateMsg(self):
         msg = self.IDENTIFY
         FUNID = "0003"                                                  #功能id
-        waterCode = self.waterCode                            #消息流水号
+        waterCode = self.int2hexStringByBytes(self.waterCode,2)         #消息流水号
         DEV_ID = self.devid2hexString(self.DEV_ID)                      #设备id
         msgBody = self.getMsgBody()  # 消息体
         msgLen = int(len(msgBody) / 2)
-        property = self.getMsgProperty(msgBodyLen=msgLen,encryptionType=0)
+        property = self.getMsgProperty(msgBodyLen=msgLen,encryptionType=self.encryptionType)
         checkCode = self.getCheckCode(FUNID + waterCode + DEV_ID + property + msgBody)
         msg = msg + FUNID + waterCode + DEV_ID + property + msgBody + checkCode + self.IDENTIFY
         return msg
@@ -82,7 +83,6 @@ class OBDCAN_protocol_m300(M300Base):
     # 获取消息体
     #################################################
     def getMsgBody(self):
-        data = ""
         dateInfo = self.getDateInfo(self.timeInfo)                      # 日期
         prototolType = self.prototolType                                #协议类别
         statusMask = self.statusMask                                    #状态掩码
@@ -97,7 +97,43 @@ class OBDCAN_protocol_m300(M300Base):
         retain9 = self.int2hexStringByBytes(self.retain9)
         retail10 = self.int2hexStringByBytes(self.retail10)
 
-        dataFlowMask = self.dataFlowMask
+        dataFlowMask = self.dataFlowMask                                #数据流掩码
+        votage = self.int2hexStringByBytes(self.votage,2)               #电瓶电压
+        totalMilleageType = self.int2hexStringByBytes(self.totalMilleageType)                    #总里程类别
+        totalMilleage = self.int2hexStringByBytes(self.totalMilleage,4)                          #行驶里程,上传值单位为m(米)
+        totalOil = self.int2hexStringByBytes(self.totalOil,4)                                    #总的燃油消耗量,上传值单位为ml(毫升)
+        troubleLightStatus = self.int2hexStringByBytes(self.troubleLightStatus)                  #故障灯状态(MIL)
+        troubleCodeNum = self.int2hexStringByBytes(self.troubleCodeNum)                          #故障码个数
+        engineSpeed = self.int2hexStringByBytes(self.engineSpeed,2)                              #发动机转速
+        speed = self.int2hexStringByBytes(self.speed)                                            #车辆速度
+        airInletTemperature = self.int2hexStringByBytes(self.airInletTemperature)                #进气口温度
+        coolingLiquidTemperature = self.int2hexStringByBytes(self.coolingLiquidTemperature)      #冷却液温度
+        envTemperature = self.int2hexStringByBytes(self.envTemperature)                          #车辆环境温度
+        intakeManifoldPressure = self.int2hexStringByBytes(self.intakeManifoldPressure)          #进气歧管压力
+        oilPressure = self.int2hexStringByBytes(self.oilPressure,2)                              #燃油压力
+        atmosphericPressure = self.int2hexStringByBytes(self.atmosphericPressure)                #大气压力
+        airFlow = self.int2hexStringByBytes(self.airFlow,2)                                      #空气流量
+        valveLocation = self.int2hexStringByBytes(self.valveLocation,2)                          #气门位置传感器
+        acceleratorLocation = self.int2hexStringByBytes(self.acceleratorLocation,2)              #油门踏板位置
+        engineRunTime = self.int2hexStringByBytes(self.engineRunTime,2)                          #发动机运行时间
+        troubleMileage = self.int2hexStringByBytes(self.troubleMileage,4)                        #故障行驶里程
+        surplusOil = self.int2hexStringByBytes(self.surplusOil,2)                                #剩余油量
+        engineLoad = self.int2hexStringByBytes(self.engineLoad)                                  #发动机负荷
+        fuelTrim = self.int2hexStringByBytes(self.fuelTrim,2)                                    #长期燃油修正(组1)
+        fireAngle = self.int2hexStringByBytes(self.fireAngle,2)                                  #点火提前角
+        dashboardTotailMilleage = self.int2hexStringByBytes(self.dashboardTotailMilleage,4)      #仪表总里程
+        carTotalRunTime = self.int2hexStringByBytes(self.carTotalRunTime,4)                      #车辆总运行时间
+        retail = self.retail
+        tripMark = self.tripMark                                                                 #驾驶循环标签
+        data = dateInfo + prototolType + statusMask + safeStatus + doorStatus
+        data = data + lockStatus + windowStatus + lightStatus + swichStatusA + swichStatusB
+        data = data + dataBit + retain9 + retail10 + dataFlowMask + votage
+        data = data + totalMilleageType + totalMilleage + totalOil + troubleLightStatus + troubleCodeNum
+        data = data + engineSpeed + speed + airInletTemperature + coolingLiquidTemperature + envTemperature
+        data = data + intakeManifoldPressure + oilPressure + atmosphericPressure + airFlow + valveLocation
+        data = data + acceleratorLocation + engineRunTime + troubleMileage + surplusOil + engineLoad
+        data = data + fuelTrim + fireAngle + dashboardTotailMilleage + carTotalRunTime + retail
+        data = data + tripMark
         return data
 
     #获取安全状态

lib/protocol/m300/VersionInfo_protocol_m300.py

@@ -7,11 +7,12 @@ from lib.protocol.m300.M300Base import M300Base
 '''
 
 class VersionInfo_protocol_m300(M300Base):
-    def __init__(self,waterCode = "0003",DEV_ID = "M121501010001",SWVersion="VSTA000GV100",SWDate="2020-03-30",HWVersion="M1.0" \
+    def __init__(self,waterCode = 3,DEV_ID = "M121501010001",encryptionType=0,SWVersion="VSTA000GV100",SWDate="2020-03-30",HWVersion="M1.0" \
                  ,GSMType="GSM_type_123456",carType="150D",engineCode=1,VINCode="VIN_CODE_01234567890"):
         super().__init__()                            # 不执行该方法，无法使用父类里面定义的属性
         self.waterCode = waterCode                    #消息流水号
         self.DEV_ID = DEV_ID                          #设备Id
+        self.encryptionType = encryptionType          #消息属性里面的是否加密字段
 
         self.SWVersion = SWVersion                    #软件版本号
         self.SWDate = SWDate                          #软件日期
@@ -28,11 +29,11 @@ class VersionInfo_protocol_m300(M300Base):
     def generateMsg(self):
         msg = self.IDENTIFY
         FUNID = "0007"                                                  #功能id
-        waterCode = self.waterCode                            #消息流水号
+        waterCode = self.int2hexStringByBytes(self.waterCode,2)         #消息流水号
         DEV_ID = self.devid2hexString(self.DEV_ID)                      #设备id
         msgBody = self.getMsgBody()  # 消息体
         msgLen = int(len(msgBody) / 2)
-        property = self.getMsgProperty(msgBodyLen=msgLen,encryptionType=0)
+        property = self.getMsgProperty(msgBodyLen=msgLen,encryptionType=self.encryptionType)
         checkCode = self.getCheckCode(FUNID + waterCode + DEV_ID + property + msgBody)
         msg = msg + FUNID + waterCode + DEV_ID + property + msgBody + checkCode + self.IDENTIFY
         return msg

lib/protocol/m300Plateform/M300Common_res.py

+#encoding:utf-8
+
+'''
+定义下行通用应答消息解码类
+'''
+import json
+
+from lib.protocol.m300.M300Base import M300Base
+from lib.protocol.m300Plateform.ResponseBase import ResponseBase
+
+class M300Common_res(ResponseBase):
+    def __init__(self,msg):
+        super().__init__()
+        if type(msg) == bytes:
+            self.msg = self.binary2ascii(msg)
+        else:
+            self.msg = msg
+        self.msg = self.restore_7e7d(self.msg)
+
+
+    #######################################################
+    # 获取消息
+    #######################################################
+    def getMsg(self):
+        json_msg = {}
+        json_msg["FUNID"] = self.msg[2:6]
+        json_msg["waterCode"] = self.hexString2int(self.msg[6:10])
+        json_msg["DEV_ID"] = self.msg[10:24]
+        json_msg["property"] = self.getMsgProperty()
+        json_msg["body"] = self.getMsgBody()
+        json_msg["checkCode"] = self.msg[len(self.msg) - 4:len(self.msg) - 2]
+        json_msg["calculateCheckCode"] = self.getCalculateCheckCode()      #自己计算消息后得到的校验码
+        json_msg = json.dumps(json_msg)
+        return json_msg
+
+    #######################################################
+    # 获取消息属性
+    ######################################################
+    def getMsgProperty(self):
+        property = {}
+        data = self.msg[24:28]
+        data = self.hexString2int(data)
+        data = self.int2binStr(data)
+        encryptionType = data[2:6]
+        length = data[6:]
+        property["encryptionType"] = int(encryptionType,2)
+        property["length"] = int(length, 2)
+        return property
+
+    #######################################################
+    # 获取消息体
+    ######################################################
+    def getMsgBody(self):
+        body = {}
+        data = self.msg[28:len(self.msg) - 4]
+        body["funId"] = data
+        return body
+
+
+    #######################################################
+    # 计算消息得到校验码
+    #######################################################
+    def getCalculateCheckCode(self):
+        data = self.removeIdentify(self.msg)
+        dataLen = len(data)
+        data = data[:dataLen - 2]
+        calculateCheckCode = M300Base().getCheckCode(data)
+        return calculateCheckCode
+
+if __name__ == "__main__":
+    print(M300Common_res("7e800100034d12150101000100020003c87e").getMsg())

lib/protocol/m300Plateform/M300Login_res.py

+#encoding:utf-8
+
+'''
+定义下行通用应答消息解码类
+'''
+import json
+
+from lib.protocol.m300.M300Base import M300Base
+from lib.protocol.m300Plateform.ResponseBase import ResponseBase
+
+class M300Login_res(ResponseBase):
+    def __init__(self,msg):
+        super().__init__()
+        if type(msg) == bytes:
+            self.msg = self.binary2ascii(msg)
+        else:
+            self.msg = msg
+        self.msg = self.restore_7e7d(self.msg)
+
+
+    #######################################################
+    # 获取消息
+    #######################################################
+    def getMsg(self):
+        json_msg = {}
+        json_msg["FUNID"] = self.msg[2:6]
+        json_msg["waterCode"] = self.hexString2int(self.msg[6:10])
+        json_msg["DEV_ID"] = self.msg[10:24]
+        json_msg["property"] = self.getMsgProperty()
+        json_msg["body"] = self.getMsgBody()
+        json_msg["checkCode"] = self.msg[len(self.msg) - 4:len(self.msg) - 2]
+        json_msg["calculateCheckCode"] = self.getCalculateCheckCode()      #自己计算消息后得到的校验码
+        json_msg = json.dumps(json_msg)
+        return json_msg
+
+    #######################################################
+    # 获取消息属性
+    ######################################################
+    def getMsgProperty(self):
+        property = {}
+        data = self.msg[24:28]
+        data = self.hexString2int(data)
+        data = self.int2binStr(data)
+        encryptionType = data[2:6]
+        length = data[6:]
+        property["encryptionType"] = int(encryptionType,2)
+        property["length"] = int(length, 2)
+        return property
+
+    #######################################################
+    # 获取消息体
+    ######################################################
+    def getMsgBody(self):
+        body = {}
+        data = self.msg[28:len(self.msg) - 4]
+        body["status"] = data
+        return body
+
+
+    #######################################################
+    # 计算消息得到校验码
+    #######################################################
+    def getCalculateCheckCode(self):
+        data = self.removeIdentify(self.msg)
+        dataLen = len(data)
+        data = data[:dataLen - 2]
+        calculateCheckCode = M300Base().getCheckCode(data)
+        return calculateCheckCode
+
+if __name__ == "__main__":
+    print(M300Common_res("7e800100034d12150101000100020003c87e").getMsg())

lib/protocol/m300Plateform/ResponseBase.py

+#encoding:utf-8
+import binascii
+import time
+
+from lib.protocol.Base import Base
+
+class ResponseBase(Base):
+    def __init__(self):
+        pass
+
+    #####################################################
+    #               数字转换为16进制字符串
+    #####################################################
+    def int2hexString(self, num):
+        hexStr = hex(num)[2:]
+        if (len(hexStr) % 2) == 1:
+            hexStr = "0" + hexStr
+        return hexStr
+
+    #####################################################
+    #               数字转换为16进制字符串，通过传入字节数可自动补0
+    #               传入数据格式所占字节数
+    #####################################################
+    def int2hexStringByBytes(self, num,bytescount=1):
+        hexStr = hex(num)[2:]
+        while len(hexStr) < (bytescount * 2):
+            hexStr = "0" + hexStr
+        return hexStr
+
+    #######################################################
+    # 16进制字符串转换为整数
+    #######################################################
+    def hexString2int(self, data):
+        val = int(data,16)
+        return val
+
+    #######################################################
+    # 16进制字符串转换为ascii字符串
+    #######################################################
+    def hex2string(self,data):
+        theStr = ""
+        while data != "":
+            tmp = data[:2]
+            data = data[2:]
+            theStr = theStr + chr(int(tmp, 16))
+        return theStr
+
+    #######################################################
+    # 10进制转换为2进制字符串
+    #######################################################
+    def int2binStr(self,data,bytescount=1):
+        binStr = bin(data)
+        binStr = binStr[2:]
+        bytesLen = bytescount * 8
+        while len(binStr) < bytesLen:
+            binStr = "0" + binStr
+        return binStr
+
+    #######################################################
+    # 还原消息中被转换过的7e和7d
+    #######################################################
+    def restore_7e7d(self,data):
+        data = data.replace("7d02", "7e")
+        data = data.replace("7d01", "7d")
+        return data
+
+    #######################################################
+    # 去除标识位
+    #######################################################
+    def removeIdentify(self,data):
+        dataLen = len(data)
+        data = data[2:dataLen - 2]
+        return data
+
+    #######################################################
+    # utc 时间格式的16进制字符串转时间
+    ######################################################
+    def hexDate2date(self,hexData):
+        UTCTime = "20"
+        UTCTime = UTCTime + str(self.hexString2int(hexData[:2]))
+        UTCTime = UTCTime + "-" +  str(self.hexString2int(hexData[2:4]))
+        UTCTime = UTCTime + "-" +  str(self.hexString2int(hexData[4:6]))
+        UTCTime = UTCTime + " " +  str(self.hexString2int(hexData[6:8]))
+        UTCTime = UTCTime + ":" +  str(self.hexString2int(hexData[8:10]))
+        UTCTime = UTCTime + ":" +  str(self.hexString2int(hexData[10:12]))
+        return UTCTime
+
+    #######################################################
+    # 时间戳的16进制字符串转时间
+    ######################################################
+    def hexTimestamp2date(self,hexData):
+        timeStamp = self.hexString2int(hexData)
+        timeArray = time.localtime(timeStamp)
+        otherStyleTime = time.strftime("%Y-%m-%d %H:%M:%S", timeArray)
+        return otherStyleTime
+
+if __name__ == "__main__":
+    print(ResponseBase().hexDate2date("01c329ed065"))
+    print(ResponseBase().hexTimestamp2date("5e60723b"))
+
+

lib/socket/protocolTest_M300.py

@@ -4,6 +4,7 @@ import socket
 
 from lib.protocol.m300.GPS_protocol_m300 import GPS_protocol_m300
 from lib.protocol.m300.Heartbeat_protocol_300 import Heartbeat_protocol_300
+from lib.protocol.m300.OBDCAN_protocol_m300 import OBDCAN_protocol_m300
 from lib.protocol.m300.VersionInfo_protocol_m300 import VersionInfo_protocol_m300
 from lib.protocol.report.GPSReport_protocol import GPSReport_protocol
 from lib.protocol.report.OBDReport_CAN_protocol import OBDReport_CAN_protocol
@@ -18,19 +19,20 @@ from lib.protocol.report.EventReport_protocol import EventReport_protocol
 # host = "10.100.12.34"
 # port = 8712
 
-# host = "10.100.12.32"
-# port = 9009
+host = "10.100.12.32"
+port = 9009
 
 # host = "10.100.5.251"
 # port = 9009
 
-host = "10.100.5.251"
-port = 9009
+# host = "10.100.5.251"
+# port = 9009
 
 # msg = Heartbeat_protocol_300().generateMsg()                            #心跳报文
 # msg = GPS_protocol_m300().generateMsg()                                 #GPS报文
-msg = VersionInfo_protocol_m300().generateMsg()                         #终端版本报文
+# msg = VersionInfo_protocol_m300().generateMsg()                         #终端版本报文
 # msg = "7e000400e14d2019120315000000957e"   #终端上报心跳协议
+msg = OBDCAN_protocol_m300().generateMsg()                              #OBD CAN报文
 
 
 print(msg)

run.py

@@ -9,6 +9,7 @@ from views.protocolTools.M_carSimulater_process import M_carSimulater_process
 from views.protocolTools.test_view import test_view
 
 from views.m300Tools.P_m300Protocol_view import P_m300Protocol_view
+from views.m300Tools.P_m300Protocol_process import P_m300Protocol_process
 
 from views.messageTools.msgSetting_view import msgSetting_view
 from views.messageTools.msgSetting_process import msgSetting_process
@@ -25,6 +26,7 @@ app.register_blueprint(M_carSimulater_process,url_prefix = "/protocolTools/M_car
 app.register_blueprint(test_view,url_prefix = "/protocolTools/test_view")
 
 app.register_blueprint(P_m300Protocol_view,url_prefix = "/m300Tools/P_m300Protocol_view")
+app.register_blueprint(P_m300Protocol_process,url_prefix = "/m300Tools/P_m300Protocol_process")
 
 app.register_blueprint(msgSetting_view,url_prefix = "/messageTools/msgSetting_view")
 app.register_blueprint(msgSetting_process,url_prefix = "/messageTools/msgSetting_process")

static/js/m300Tools/m300.js

@@ -6,8 +6,12 @@ function m300ProtocolManTab(e){
     var id = $(e).attr("id");
     if(id == "P_heartBeat_m300_msg"){
         $(location).attr('href', "http://" + window.location.host + "/m300Tools/P_m300Protocol_view/P_heartBeat_m300_page");
-    }else if(id == "userDefined_protocol"){
-        $(location).attr('href', "http://" + window.location.host + "/protocolTools/protocolReport_view/userDefined_protocol_page");
+    }else if(id == "socketSetting"){
+        $(location).attr('href', "http://" + window.location.host + "/m300Tools/P_m300Protocol_view/socketSetting_page");
+    }else if(id == "P_login_m300_msg"){
+        $(location).attr('href', "http://" + window.location.host + "/m300Tools/P_m300Protocol_view/P_login_m300_page");
+    }else if(id == "P_version_m300_msg"){
+        $(location).attr('href', "http://" + window.location.host + "/m300Tools/P_m300Protocol_view/P_version_m300_page");
     }else{
         alert(id)
     }

templates/m300Tools/report/P_heartBeat_m300_page.html

@@ -32,25 +32,23 @@
 <div id="container2" style="width:83%;min-height:750px;float:left;_background:grey;margin-top:50px;">
     {% block content_02 %}
     <ul class="nav nav-pills" style="font-size:14px;">
+        <li role="presentation"><a id="socketSetting" {% if arg.path[2]=="socketSetting_page" %} class="link-tab" {% endif %} onclick="m300ProtocolManTab(this)">设置</b></a></li>
         <li role="presentation"><a id="P_heartBeat_m300_msg" {% if arg.path[2]=="P_heartBeat_m300_page" %} class="link-tab" {% endif %} onclick="m300ProtocolManTab(this)">心跳消息</b></a></li>
+        <li role="presentation"><a id="P_login_m300_msg" {% if arg.path[2]=="P_login_m300_page" %} class="link-tab" {% endif %} onclick="m300ProtocolManTab(this)">登录消息</b></a></li>
+        <li role="presentation"><a id="P_version_m300_msg" {% if arg.path[2]=="P_version_m300_page" %} class="link-tab" {% endif %} onclick="m300ProtocolManTab(this)">版本消息</b></a></li>
     </ul>
     {% endblock %}
     {% block content_1 %}
     <div id="container3" style="width:100%;min-height:750px;float:left;_background:green;margin-top:10px;_border-top: 1px solid #eee;">
         <div style="width:100%;_background:green;padding:5px;padding-top:0px;">
             <h3 style="border-bottom: 1px solid #eee;">设置消息头：</h3>
-            <label>消息ID：</label><input id="msgID" type="text" class="form-control" disabled="disabled" value="0002" style="width:80px;">
-            <label>终端手机号：</label><input id="phoneNum" type="text" class="form-control" value="13146201119" style="width:150px;">
-            <label>消息流水号：</label><input id="msgWaterCode" type="text" class="form-control" value="1" style="width:60px;">
+            <label>功能ID：</label><input id="FUNID" type="text" class="form-control" disabled="disabled" value="0004" style="width:80px;">
+            <label>消息序列号：</label><input id="waterCode" type="text" class="form-control" value="1" style="width:60px;">
+            <label>设备ID：</label><input id="DEV_ID" type="text" class="form-control" value="M202004070000" style="width:150px;">
             <label>是否加密：</label><select style="width:100px;" id="encryptionType" class="form-control">
                 <option value="0">不加密</option>
                 <option value="1024">加密</option>
             </select>
-            <label>有无分包：</label><select style="width:80px;" id="subPkg" class="form-control" onchange="hasSubPkg()">
-                <option value="0">无</option>
-                <option value="8192">有</option>
-            </select>
-            <label id="subPkg_label" style="color:grey;">分包个数：</label><input disabled="disabled" id="pkgCounts" type="text" class="form-control" value="0" style="width:60px;">
         </div>
         <H3 style="border-bottom: 1px solid #eee;">设置心跳消息内容：</H3>
         <ul class="protocol_content" style="padding:0px;">
@@ -71,40 +69,31 @@
     <script>
     //发送GPS数据
     $("#sendMsgBtn").click(function(){
-        var msgID = $("#msgID").val();
-        var phoneNum = $("#phoneNum").val();
-        var msgWaterCode = $("#msgWaterCode").val();
+        var FUNID = $("#FUNID").val();
+        var waterCode = $("#waterCode").val();
+        var DEV_ID = $("#DEV_ID").val();
         var encryptionType = $("#encryptionType").val();
-        var subPkg = $("#subPkg").val();
-        var pkgCounts = ""
-        if (subPkg != "8192"){
-            pkgCounts = "0"
-        }else{
-            pkgCounts = $("#pkgCounts").val();
-        }
 
         var data = {};
-        data["msgID"] = msgID;
-        data["phoneNum"] = phoneNum;
-        data["msgWaterCode"] = msgWaterCode;
+        data["FUNID"] = FUNID;
+        data["waterCode"] = waterCode;
+        data["DEV_ID"] = DEV_ID;
         data["encryptionType"] = encryptionType;
-        data["subPkg"] = subPkg;
-        data["pkgCounts"] = pkgCounts;
 
         var host = window.location.host;
         $("#showFeedback").val("")
         $.ajax({
-            url:"http://" + host + "/messageTools/message_process/porcessHeartBeatMsg",
+            url:"http://" + host + "/m300Tools/P_m300Protocol_process/porcessHeartBeatMsg",
             type:"post",
             data:data,
             dataType:"json",
             success:function(data){
                 if(data.status == 200){
                     //window.location.reload()
-                    var theShow = "原始数据：　"　+ data.original + "\n";
+                    var theShow = "原始数据：　"　+ data.msgSend + "\n";
                     theShow = theShow + "收到数据：　" + data.result + "\n";
-                    theShow = theShow + "收到数据16进制：　" + data.resultH + "\n";
-                    theShow = theShow + "解析数据：　"　+ JSON.stringify(data.parse) + "\n";
+                    theShow = theShow + "收到数据16进制：　" + data.rev + "\n";
+                    theShow = theShow + "解析数据：　"　+ JSON.stringify(data.orgRev) + "\n";
                     $("#showFeedback").val(theShow)
                 }else{
                     $("#showFeedback").val(data.message)
@@ -113,17 +102,6 @@
             }
         });
     });
-
-    function hasSubPkg(){
-        value = $("#subPkg").val()
-        if(value == "8192"){
-            $("#subPkg_label").css("color","black")
-            $("#pkgCounts").removeAttr("disabled")
-        }else{
-            $("#subPkg_label").css("color","grey")
-            $("#pkgCounts").attr("disabled","disabled")
-        }
-    }
     </script>
     {% endblock %}
 </div>

templates/m300Tools/report/P_login_m300_page.html

+{% extends "m300Tools/report/P_heartBeat_m300_page.html" %}
+{% block title %}login_msg{% endblock %}
+
+{% block content_1 %}
+<div id="container3" style="width:100%;min-height:750px;float:left;_background:green;margin-top:10px;_border-top: 1px solid #eee;">
+    <div style="width:100%;_background:green;padding:5px;padding-top:0px;">
+        <h3 style="border-bottom: 1px solid #eee;">设置消息头：</h3>
+        <label>功能ID：</label><input id="FUNID" type="text" class="form-control" disabled="disabled" value="00ff" style="width:80px;">
+        <label>消息序列号：</label><input id="waterCode" type="text" class="form-control" value="1" style="width:60px;">
+        <label>设备ID：</label><input id="DEV_ID" type="text" class="form-control" value="M202004070000" style="width:150px;">
+        <label>是否加密：</label><select style="width:100px;" id="encryptionType" class="form-control">
+            <option value="0">不加密</option>
+            <option value="1024">加密</option>
+        </select>
+    </div>
+    <H3 style="border-bottom: 1px solid #eee;">设置心跳消息内容：</H3>
+    <ul class="protocol_content" style="padding:0px;">
+        <label style="color:red;width:130px;">登录消息无消息体...</label>
+    </ul>
+    <H3 style="border-bottom: 1px solid #eee;">控制：</H3>
+    <div style="width:100%;padding:5px;margin-top:10px;">
+        <button type="button" class="btn btn-primary" id="sendMsgBtn">发送消息</button>
+    </div>
+    <H3 style="border-bottom: 1px solid #eee;">返回信息：</H3>
+    <div style="width:100%;padding:5px;margin-top:10px;">
+        <textarea id="showFeedback" style="width:100%;padding:5px;" rows="8"></textarea>
+    </div>
+</div>
+
+
+
+<script>
+//发送GPS数据
+$("#sendMsgBtn").click(function(){
+    var FUNID = $("#FUNID").val();
+    var waterCode = $("#waterCode").val();
+    var DEV_ID = $("#DEV_ID").val();
+    var encryptionType = $("#encryptionType").val();
+
+    var data = {};
+    data["FUNID"] = FUNID;
+    data["waterCode"] = waterCode;
+    data["DEV_ID"] = DEV_ID;
+    data["encryptionType"] = encryptionType;
+
+    var host = window.location.host;
+    $("#showFeedback").val("")
+    $.ajax({
+        url:"http://" + host + "/m300Tools/P_m300Protocol_process/porcessLoginMsg",
+        type:"post",
+        data:data,
+        dataType:"json",
+        success:function(data){
+            if(data.status == 200){
+                //window.location.reload()
+                var theShow = "原始数据：　"　+ data.msgSend + "\n";
+                theShow = theShow + "收到数据：　" + data.result + "\n";
+                theShow = theShow + "收到数据16进制：　" + data.rev + "\n";
+                theShow = theShow + "解析数据：　"　+ JSON.stringify(data.orgRev) + "\n";
+                $("#showFeedback").val(theShow)
+            }else{
+                $("#showFeedback").val(data.message)
+                alert(data.message);
+            }
+        }
+    });
+});
+</script>
+{% endblock %}
\ No newline at end of file

templates/m300Tools/report/P_version_m300_page.html

+{% extends "m300Tools/report/P_heartBeat_m300_page.html" %}
+{% block title %}version_msg{% endblock %}
+
+{% block content_1 %}
+<div id="container3" style="width:100%;min-height:750px;float:left;_background:green;margin-top:10px;_border-top: 1px solid #eee;">
+    <div style="width:100%;_background:green;padding:5px;padding-top:0px;">
+        <h3 style="border-bottom: 1px solid #eee;">设置消息头：</h3>
+        <label>功能ID：</label><input id="FUNID" type="text" class="form-control" disabled="disabled" value="0007" style="width:80px;">
+        <label>消息序列号：</label><input id="waterCode" type="text" class="form-control" value="1" style="width:60px;">
+        <label>设备ID：</label><input id="DEV_ID" type="text" class="form-control" value="M202004070000" style="width:150px;">
+        <label>是否加密：</label><select style="width:100px;" id="encryptionType" class="form-control">
+            <option value="0">不加密</option>
+            <option value="1024">加密</option>
+        </select>
+    </div>
+    <H3 style="border-bottom: 1px solid #eee;">设置心跳消息内容：</H3>
+    <ul class="protocol_content" style="padding:0px;">
+        <li><label>软件版本号：</label><input id="SWVersion" type="text" class="form-control" value="VSTA000GV100"></li>
+        <li><label>软件日期：</label><input id="SWDate" type="text" class="form-control" value="2020-03-30"></li>
+        <li><label>硬件版本：</label><input id="HWVersion" type="text" class="form-control" value="M1.0"></li>
+        <li><label>GSM 型号：</label><input id="GSMType" type="text" class="form-control" value="GSM_type_123456"></li>
+        <li><label>车系车型ID：</label><input id="carType" type="text" class="form-control" value="150D"></li>
+        <li><label style="word-break:break-all;font-size:12px;">发动机编码类别：</label><input id="engineCode" type="text" class="form-control" value="1"></li>
+        <li style="width:350px;"><label style="word-break:break-all;font-size:12px;">汽车VIN码或发动机ECU编码：</label><input style="width:250px;" id="VINCode" type="text" class="form-control" value="VIN_CODE_01234567890"></li>
+    </ul>
+    <H3 style="border-bottom: 1px solid #eee;">控制：</H3>
+    <div style="width:100%;padding:5px;margin-top:10px;">
+        <button type="button" class="btn btn-primary" id="sendMsgBtn">发送消息</button>
+    </div>
+    <H3 style="border-bottom: 1px solid #eee;">返回信息：</H3>
+    <div style="width:100%;padding:5px;margin-top:10px;">
+        <textarea id="showFeedback" style="width:100%;padding:5px;" rows="8"></textarea>
+    </div>
+</div>
+
+
+
+<script>
+//发送GPS数据
+$("#sendMsgBtn").click(function(){
+    var FUNID = $("#FUNID").val();
+    var waterCode = $("#waterCode").val();
+    var DEV_ID = $("#DEV_ID").val();
+    var encryptionType = $("#encryptionType").val();
+
+    var SWVersion = $("#SWVersion").val();
+    var SWDate = $("#SWDate").val();
+    var HWVersion = $("#HWVersion").val();
+    var GSMType = $("#GSMType").val();
+    var carType = $("#carType").val();
+    var engineCode = $("#engineCode").val();
+    var VINCode = $("#VINCode").val();
+
+    var data = {};
+    data["FUNID"] = FUNID;
+    data["waterCode"] = waterCode;
+    data["DEV_ID"] = DEV_ID;
+    data["encryptionType"] = encryptionType;
+
+    data["SWVersion"] = SWVersion;
+    data["SWDate"] = SWDate;
+    data["HWVersion"] = HWVersion;
+    data["GSMType"] = GSMType;
+    data["carType"] = carType;
+    data["engineCode"] = engineCode;
+    data["VINCode"] = VINCode;
+
+    var host = window.location.host;
+    $("#showFeedback").val("")
+    $.ajax({
+        url:"http://" + host + "/m300Tools/P_m300Protocol_process/porcessVersionMsg",
+        type:"post",
+        data:data,
+        dataType:"json",
+        success:function(data){
+            if(data.status == 200){
+                //window.location.reload()
+                var theShow = "原始数据：　"　+ data.msgSend + "\n";
+                theShow = theShow + "收到数据：　" + data.result + "\n";
+                theShow = theShow + "收到数据16进制：　" + data.rev + "\n";
+                theShow = theShow + "解析数据：　"　+ JSON.stringify(data.orgRev) + "\n";
+                $("#showFeedback").val(theShow)
+            }else{
+                $("#showFeedback").val(data.message)
+                alert(data.message);
+            }
+        }
+    });
+});
+</script>
+{% endblock %}
\ No newline at end of file

templates/m300Tools/report/socketSetting_page.html

+{% extends "m300Tools/report/P_heartBeat_m300_page.html" %}
+{% block title %}setting_page{% endblock %}
+{% block content_1 %}
+<div id="container3" style="width:100%;min-height:750px;float:left;_background:green;margin-top:10px;_border-top: 1px solid #eee;">
+    <div style="width:100%;_background:green;padding:5px;padding-top:0px;">
+        <h3 style="border-bottom: 1px solid #eee;">连接设置：</h3>
+        <label>主机地址：</label><input id="host" type="text" class="form-control" value="{{ arg['socket']['host']}}">
+        <label style="margin-left:10px;">端口：</label><input id="port" type="text" class="form-control" value="{{ arg['socket']['port']}}" style="width:100px;">
+    </div>
+    <H3 style="border-bottom: 1px solid #eee;">控制：</H3>
+    <div style="width:100%;padding:5px;margin-top:10px;">
+        <button type="button" class="btn btn-primary" id="saveSetting">保存设置</button>
+    </div>
+</div>
+
+
+
+<script>
+//保存设置数据
+$("#saveSetting").click(function(){
+    var host = $("#host").val();
+    var port = $("#port").val();
+
+    var data = {};
+    data["host"] = host;
+    data["port"] = port;
+
+    var host = window.location.host;
+    $.ajax({
+        url:"http://" + host + "/m300Tools/P_m300Protocol_process/porcessSocketSetting",
+        type:"post",
+        data:data,
+        dataType:"json",
+        success:function(data){
+            if(data.status == 200){
+                window.location.reload()
+            }else{
+                $("#showFeedback").val(data.message)
+                alert(data.message);
+            }
+        }
+    });
+});
+</script>
+{% endblock %}
\ No newline at end of file

templates/protocolTools/setting/socketSetting.html

@@ -62,7 +62,7 @@
 
         var host = window.location.host;
         $.ajax({
-            url:"http://" + host + "/protocolTools/setting_process/porcessSocketSetting",
+            url:"http://" + host + "/protocolTools/setting_process/socketSetting_page",
             type:"post",
             data:data,
             dataType:"json",

views/m300Tools/P_m300Protocol_process.py

+#coding:utf-8
+
+from flask import Blueprint ,Response,request
+from configparser import ConfigParser
+
+from lib.protocol.m300.Heartbeat_protocol_300 import Heartbeat_protocol_300
+from lib.protocol.m300.Login_protocol_m300 import Login_protocol_m300
+from lib.protocol.m300.VersionInfo_protocol_m300 import VersionInfo_protocol_m300
+from lib.protocol.m300Plateform.M300Common_res import M300Common_res
+from lib.protocol.m300Plateform.M300Login_res import M300Login_res
+from lib.protocol.reportPlateform.Common_res import Common_res
+
+from lib.socket.ClientSocket import ClientSocket
+import json
+import traceback
+import binascii
+
+P_m300Protocol_process = Blueprint('P_m300Protocol_process', __name__)
+
+##########################################
+#   【接口类型】保存设置
+##########################################
+@P_m300Protocol_process.route("/porcessSocketSetting",methods=['POST'])
+def porcessSocketSetting():
+    host = request.form.get("host")
+    port = request.form.get("port")
+
+    data = {}
+    if (host == None or port == None):
+        data["status"] = "4003"
+        data["message"] = "Info: 请检查是否传入了空数据！"
+        return Response(json.dumps(data), mimetype='application/json')
+    else:
+        try:
+            # d读取config文件
+            conf_R = ConfigParser()
+            conf_R.read("config/m300Tools/m300Tools.conf")
+            conf_W = conf_R
+            conf_W["socket"]["host"] = host
+            conf_W["socket"]["port"] = port
+            with open("config/m300Tools/m300Tools.conf", "w") as fi:
+                conf_W.write(fi)
+            data["status"] = "200"
+            data["message"] = "Sucess: "
+        except BaseException as e:
+            # 打印异常信息
+            traceback.print_exc()
+            data["status"] = "4003"
+            data["message"] = "Error: 处理失败！"
+    return Response(json.dumps(data), mimetype='application/json')
+
+##########################################
+#   【接口类型】处理发送的心跳上报报文
+##########################################
+@P_m300Protocol_process.route("/porcessHeartBeatMsg",methods=['POST'])
+def porcessHeartBeatMsg():
+    FUNID = request.form.get("FUNID")
+    waterCode = int(request.form.get("waterCode"))
+    DEV_ID = request.form.get("DEV_ID")
+    encryptionType = int(request.form.get("encryptionType"))
+
+    data = {}
+    if (waterCode == None or DEV_ID == None or encryptionType == None):
+        data["status"] = "4003"
+        data["message"] = "Info: 请检查是否传入了空数据！"
+        return Response(json.dumps(data), mimetype='application/json')
+    else:
+        try:
+            conf_R = ConfigParser()
+            conf_R.read("config/m300Tools/m300Tools.conf")
+            cliSocket = ClientSocket(conf_R.get("socket", "host"),conf_R.getint("socket", "port"))
+            cliSocket.connect()
+            heartBeatProtocolObj = Heartbeat_protocol_300(waterCode = waterCode,DEV_ID = DEV_ID,encryptionType=encryptionType)
+            msg = heartBeatProtocolObj.generateMsg()
+            cliSocket.send(msg)
+            socRecv = cliSocket.receive()
+            socRecvo = str(socRecv)
+            cliSocket.close()
+            data["status"] = "200"
+            data["message"] = "Sucess: "
+            data["msgSend"] = msg
+            data["result"] = socRecvo
+            data["rev"] = str(binascii.b2a_hex(socRecv))[2:][:-1]
+            data["orgRev"] = json.loads(M300Common_res(data["rev"]).getMsg())
+        except BaseException as e:
+            # 打印异常信息
+            traceback.print_exc()
+            data["status"] = "4003"
+            data["message"] = "Error: 处理失败！"
+    return Response(json.dumps(data), mimetype='application/json')
+
+##########################################
+#   【接口类型】处理发送的登录上报报文
+##########################################
+@P_m300Protocol_process.route("/porcessLoginMsg",methods=['POST'])
+def porcessLoginMsg():
+    FUNID = request.form.get("FUNID")
+    waterCode = int(request.form.get("waterCode"))
+    DEV_ID = request.form.get("DEV_ID")
+    encryptionType = int(request.form.get("encryptionType"))
+
+    data = {}
+    if (waterCode == None or DEV_ID == None or encryptionType == None):
+        data["status"] = "4003"
+        data["message"] = "Info: 请检查是否传入了空数据！"
+        return Response(json.dumps(data), mimetype='application/json')
+    else:
+        try:
+            conf_R = ConfigParser()
+            conf_R.read("config/m300Tools/m300Tools.conf")
+            cliSocket = ClientSocket(conf_R.get("socket", "host"),conf_R.getint("socket", "port"))
+            cliSocket.connect()
+            protocolObj = Login_protocol_m300(waterCode = waterCode,DEV_ID = DEV_ID,encryptionType=encryptionType)
+            msg = protocolObj.generateMsg()
+            cliSocket.send(msg)
+            socRecv = cliSocket.receive()
+            socRecvo = str(socRecv)
+            cliSocket.close()
+            data["status"] = "200"
+            data["message"] = "Sucess: "
+            data["msgSend"] = msg
+            data["result"] = socRecvo
+            data["rev"] = str(binascii.b2a_hex(socRecv))[2:][:-1]
+            data["orgRev"] = json.loads(M300Login_res(data["rev"]).getMsg())
+        except BaseException as e:
+            # 打印异常信息
+            traceback.print_exc()
+            data["status"] = "4003"
+            data["message"] = "Error: 处理失败！"
+    return Response(json.dumps(data), mimetype='application/json')
+
+##########################################
+#   【接口类型】处理发送的登录上报报文
+##########################################
+@P_m300Protocol_process.route("/porcessVersionMsg",methods=['POST'])
+def porcessVersionMsg():
+    FUNID = request.form.get("FUNID")
+    waterCode = int(request.form.get("waterCode"))
+    DEV_ID = request.form.get("DEV_ID")
+    encryptionType = int(request.form.get("encryptionType"))
+
+    SWVersion = request.form.get("SWVersion")
+    SWDate = request.form.get("SWDate")
+    HWVersion = request.form.get("HWVersion")
+    GSMType = request.form.get("GSMType")
+    carType = request.form.get("carType")
+    engineCode = int(request.form.get("engineCode"))
+    VINCode = request.form.get("VINCode")
+
+    data = {}
+    if (waterCode == None or DEV_ID == None or encryptionType == None or SWVersion == None or SWDate == None or HWVersion == None \
+            or GSMType == None or carType == None or engineCode == None or VINCode == None):
+        data["status"] = "4003"
+        data["message"] = "Info: 请检查是否传入了空数据！"
+        return Response(json.dumps(data), mimetype='application/json')
+    else:
+        try:
+            conf_R = ConfigParser()
+            conf_R.read("config/m300Tools/m300Tools.conf")
+            cliSocket = ClientSocket(conf_R.get("socket", "host"),conf_R.getint("socket", "port"))
+            cliSocket.connect()
+            protocolObj = VersionInfo_protocol_m300(waterCode = waterCode,DEV_ID = DEV_ID,encryptionType=encryptionType,SWVersion=SWVersion \
+            ,SWDate=SWDate,HWVersion=HWVersion,GSMType=GSMType,carType=carType,engineCode=engineCode,VINCode=VINCode)
+            msg = protocolObj.generateMsg()
+            cliSocket.send(msg)
+            socRecv = cliSocket.receive()
+            socRecvo = str(socRecv)
+            cliSocket.close()
+            data["status"] = "200"
+            data["message"] = "Sucess: "
+            data["msgSend"] = msg
+            data["result"] = socRecvo
+            data["rev"] = str(binascii.b2a_hex(socRecv))[2:][:-1]
+            data["orgRev"] = json.loads(M300Common_res(data["rev"]).getMsg())
+        except BaseException as e:
+            # 打印异常信息
+            traceback.print_exc()
+            data["status"] = "4003"
+            data["message"] = "Error: 处理失败！"
+    return Response(json.dumps(data), mimetype='application/json')
\ No newline at end of file

views/m300Tools/P_m300Protocol_view.py

@@ -7,7 +7,27 @@ import re
 P_m300Protocol_view = Blueprint('P_m300Protocol_view', __name__)
 
 ##########################################
-#   【视图类型】访问侧车机模拟器页面
+#   【视图类型】访问socket设置页面
+##########################################
+@P_m300Protocol_view.route('/socketSetting_page')
+def socketSetting_page():
+    #获取请求的路劲
+    url = request.url
+    reqPath = re.findall("http://(.*)$",url)[0]
+    reqPath = re.findall("/(.*)$", reqPath)[0]
+    arg = {}
+    path = "m300Tools/report/socketSetting_page.html"
+    arg["path"] = reqPath.split("/")
+    arg["socket"] = {}
+    # 读取config文件
+    conf_R = ConfigParser()
+    conf_R.read("config/m300Tools/m300Tools.conf")
+    arg["socket"]["host"] = conf_R.get("socket", "host")
+    arg["socket"]["port"] = conf_R.getint("socket", "port")
+    return render_template(path,arg=arg)
+
+##########################################
+#   【视图类型】访问心跳协议页面
 ##########################################
 @P_m300Protocol_view.route('/P_heartBeat_m300_page')
 def P_heartBeat_m300_page():
@@ -19,3 +39,31 @@ def P_heartBeat_m300_page():
     path = "m300Tools/report/P_heartBeat_m300_page.html"
     arg["path"] = reqPath.split("/")
     return render_template(path,arg=arg)
+
+##########################################
+#   【视图类型】访问登录协议页面
+##########################################
+@P_m300Protocol_view.route('/P_login_m300_page')
+def P_login_m300_page():
+    #获取请求的路劲
+    url = request.url
+    reqPath = re.findall("http://(.*)$",url)[0]
+    reqPath = re.findall("/(.*)$", reqPath)[0]
+    arg = {}
+    path = "m300Tools/report/P_login_m300_page.html"
+    arg["path"] = reqPath.split("/")
+    return render_template(path,arg=arg)
+
+##########################################
+#   【视图类型】访问版本协议页面
+##########################################
+@P_m300Protocol_view.route('/P_version_m300_page')
+def P_version_m300_page():
+    #获取请求的路劲
+    url = request.url
+    reqPath = re.findall("http://(.*)$",url)[0]
+    reqPath = re.findall("/(.*)$", reqPath)[0]
+    arg = {}
+    path = "m300Tools/report/P_version_m300_page.html"
+    arg["path"] = reqPath.split("/")
+    return render_template(path,arg=arg)
\ No newline at end of file

views/protocolTools/setting_process.py

@@ -9,7 +9,7 @@ import traceback
 setting_process = Blueprint('setting_process', __name__)
 
 ##########################################
-#   【接口类型】处理发送的GPS上报报文
+#   【接口类型】保持设置
 ##########################################
 @setting_process.route("/porcessSocketSetting",methods=['POST'])
 def porcessSocketSetting():